Three technologies of seamless splicing screen （1）
When we go shopping in shopping malls, supermarkets, or when we go out to bars and KTV at night, we can see many Splicing Screens, but most of them have gaps, either 3.5 or 1.7mm. If it is a product in the past three years, 80 % the above are all products with these two gap specifications, but do you know that there is a product of Seamless Splicing Screen? Today, the editor of Sally will share with you the relevant knowledge about Seamless Splicing Screen.
1). What is a Seamless Splicing Screen
Which is in the field of Splicing Screens, is the pride of our people, because it is developed and promoted by us Chinese, mainly using three technologies such as 2.5d custom glass, acrylic and LED compensation. It can be processed on the basis of 3.5mm or 1.7mm, resulting in a visually seamless super-large Display Screen, which can be made with 46 inches, 49 inches, 55 inches and 65 inches!
2). Three technologies of Seamless Splicing Screen
1. Special glass, this is the earliest developed Seamless Splicing Screen processing method, which is to add a layer of glass on the Splicing Screen, with a little concave around, which plays a principle of signal refraction. The first generation product was It is a bit curved, and it has been able to achieve a Flat Display so far;
2. LED compensation technology, this is the second generation product of the Seamless Splicing Screen , which is to paste a strip of LEDs on the gap of the Splicing Screen, from incandescent lamps to the present, and customize different specifications according to different signal sources or usage scenarios. Colored LED lights for compensation and mapping to achieve a visually Seamless effect;
2. Acrylic plane processing technology, which is a new product developed in 2019, directly achieves Flat Display, covering a layer of acrylic on the Splicing Panel, with a built-in signal processing chip, so that the Display Screen can be seamlessly displayed with each other Effect.